Tips for cleaning Electric Guitar

The more you play your electric guitar, the more you need to clean it though there is no visible dirt or dust. Regular cleaning and maintenance of your electric guitar will make it look good and sound better.

The simplest type of guitar maintenance is cleaning. You should clean your guitar regularly or, at the least, every time it gets dirty. Keeping your guitar clean involves removing dirt and grime from all its various parts as well as keeping the finish smooth and shiny.

1. Simple dust can be removed with a dry cloth or a feather duster, but when dust mixes with the natural oils of your skin, that dust becomes grime. Grime can stick to all surfaces, but it’s especially noticeable on your strings.

Tips for cleaning Electric GuitarThe strings:

The natural oils from your fingertips coat the strings every time you play. The best way is to wipe down the strings after every playing session. Test the strings on your electric guitar. . They need to be changed once in a while to maintain their good tone. Buy a pack from your local music shop and replace all of them. Remove them by unwinding them from the neck or snapping them with pliers.

The wood:

A guitar is mostly made of wood, and wood likes a good rubdown. Once you’ve blown off the majority of the dust, gently rub the guitar until it’s dust-free. To dust between the strings in hard-to-reach places, use a small camel’s hair paintbrush. Clean the body of your guitar. Take a soft cloth to wipe with. Breath first and then gently rub the surface. you can use professional guitar polish to look new.


Guitar Pickups require little maintenance. Once they are installed correctly and set to the proper height, the only thing you might need to do is adjust the pickup height. Most pickups are held in position by two screws and two small springs which allow you to raise or lower the pickup. Pickups need to be at the right height in order to pick up the vibration of the string without adversely affecting the string vibration. If the pickup is too close to the string, the strings that are above the pickup might not sound in tune.


Frets are the part of the guitar that get the most wear and tear! Depending on how much you play, you will need to have your frets dressed from time to time. Look at the guitar nut. It’s located at the top of the fretboard. Take the string out and lubricate the groove with soap or a professional solution, then dry and replace the string. This will keep the string in tune.

The Bridge:

Keep the bridge slots well lubricated with soap. Wipe off the bridge with a damp cloth. If it needs more than a perfunctory cleaning, use a small toothbrush or pipe cleaner to remove embedded dirt. Remove the strings and then remove the bridge plate if you need to clean inside.

Tuning knobs:

Use a toothbrush between the tuning knobs to clean off the dust on the back of the headstock. This is a place lots of dust can collect, and sometimes years may go before a guitarist actually notices the dust gathering there. Just use the toothbrush to scrub away the dust. It may take a while because there are a lot of hard-to-get-at nooks and crannies between the machine heads.


Leave a Reply